PRESSURE SWITCH /
PRESSURE TRANSMITTER
PRESSURE SWITCH-TRANSMITTER/ALLFLUID
-14,5 TO 5800 PSI
DETAILS
| PRESSURE SWITCH-TRANSMITTER/ -14,5 TO 5800 PSI |
| Operating voltage 17 to 33 VDC |
| Current consumption w/o switch. output max50 mA |
| Switching current OUT1/OUT2 250 mA/each |
| Analog output/ burden 4…20 mA/ <500 Ohm |
| Switchlogic programmable NO/NC |
| Switch output short circuit protection |
| Electrical connection M 12 |
| Fluid connection G 1/4i external thread (optional adapter) |
| 3-digit LED-display 7-segment red |
| Display programmable 0° / 180° |
| Light for switch status all-around LED |
| Protection class IP65/67 IEC 60529 |
| Temperature range -20° C to +80° C |
| Temperature range medium -20° C to +80° C |
| Wetted material stainless steel/FPM/ceramic |
| Overload pressure 3 x FS (max 1500bar) |
| Linearity 1,0% FS |
| Temperature sensitivity (zero point) ± 0,65% FS/10K |
| Dimensions (H x W x D) 80 x 41 x 42 mm |
| ORDER CODE / PRESSURE SWITCH-TRANSMITTER/ -14,5 TO 5800 PSI |
|||
| Measuring range | Part No. | ||
| – 14,5 to 0 psi | 413000 | ||
| 0 to 232 psi | 413016 | ||
| 0 to 1450 psi | 413100 | ||
| 0 to 3625 psi | 413250 | ||
| 0 to 5800 psi | 413400 | ||
| Other pressure ranges on request | |||
PRESSURE TRANSMITTER-EPT/DEUTSCH DT
58 TO 14500 PSI
DETAILS
| PRESSURE TRANSMITTER-EPT/DEUTSCH DT/ 58 to 14500 PSI |
| Operating voltage (0 to 10 V) 15 to 30 VDC |
| Operating voltage (4 to 20 mA) 10 to 30 VDC |
| Output short-circuit-proof |
| Supply voltage reverse polarity protection |
| Electrical connection Deutsch DT 4 pole |
| Fluid connection G 1/4 |
| Wrench 22 mm |
| Protection class IP67 |
| Temperature range -40° C to +105° C |
| Temperature range medium -40° C to +125° C |
| Housing stainless steel AISi 304 |
| Wetted material stainless steel AISi 430 F/17-4 PH |
| Overload pressure see table |
| Hystersis ± 0,15% FS max |
| Linearity ± 0,25% FS max |
| Temperature sensitivity (zero point) ± 0,02% FS/°C max |
| Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
| Shock resistance 100g/11 msec according IEC 60068-2-6 |
| Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
| CE-Conformity according to EC 2014/30/EU |
| ORDER CODE / PRESSURE TANSMITTER-EPT/DEUTSCH DT/ 58 TO 14500 PSI |
|||
| Measuring range | Part No. | ||
| 58 to 232 psi | 434016 | ||
| 58 to 580 psi | 434040 | ||
| 58 to 1450 psi | 434100 | ||
| 58 to 3625 psi | 434250 | ||
| 58 to 5800 psi | 434400 | ||
| 58 to 8700 psi | 434600 | ||
| 58 to 14500 psi | 434999 | ||
| Other pressure ranges on request | |||
PRESSURE TRANSMITTER-EPT/AMP SUPER SEAL
58 TO 14500 PSI
DETAILS
| PRESSURE TRANSMITTER-EPT/AMP SUPER SEAL/ 58 to 14500 PSI |
| Operating voltage (0 to 10 V) 15 to 30 VDC |
| Operating voltage (4 to 20 mA) 10 to 30 VDC |
| Output short-circuit-proof |
| Supply voltage reverse polarity protection |
| Electrical connection AMP SUPER SEAL |
| Fluid connection G 1/4 |
| Wrench 22 mm |
| Protection class IP67 |
| Temperature range -40° C to +105° C |
| Temperature range medium -40° C to +125° C |
| Housing stainless steel AISi 304 |
| Wetted material stainless steel AISi 430 F/17-4 PH |
| Overload pressure see table |
| Hystersis ± 0,15% FS max |
| Linearity ± 0,25% FS max |
| Temperature sensitivity (zero point) ± 0,02% FS/°C max |
| Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
| Shock resistance 100g/11 msec according IEC 60068-2-6 |
| Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
| CE-Conformity according to EC 2014/30/EU |
| ORDER CODE / PRESSURE TANSMITTER-EPT/AMP SUPER SEAL/ 58 TO 14500 PSI |
|||
| Measuring range | Part No. | ||
| 58 to 232 psi | 436016 | ||
| 58 to 580 psi | 436040 | ||
| 58 to 1450 psi | 436100 | ||
| 58 to 3625 psi | 436250 | ||
| 58 to 5800 psi | 436400 | ||
| 58 to 8700 psi | 436600 | ||
| 58 to 14500 psi | 436999 | ||
| Other pressure ranges on request | |||
PRESSURE TRANSMITTER-EPT/DIN EN 175301-803
58 TO 14500 PSI
DETAILS
| PRESSURE TRANSMITTER-EPT/DIN EN 175301/ 58 to 14500 PSI |
| Operating voltage (0 to 10 V) 15 to 30 VDC |
| Operating voltage (4 to 20 mA) 10 to 30 VDC |
| Output short-circuit-proof |
| Supply voltage reverse polarity protection |
| Electrical connection DIN EN 175301-803 |
| Fluid connection G 1/4 |
| Wrench 22 mm |
| Protection class IP67 |
| Temperature range -40° C to +105° C |
| Temperature range medium -40° C to +125° C |
| Housing stainless steel AISi 304 |
| Wetted material stainless steel AISi 430 F/17-4 PH |
| Overload pressure see table |
| Hystersis ± 0,15% FS max |
| Linearity ± 0,25% FS max |
| Temperature sensitivity (zero point) ± 0,02% FS/°C max |
| Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
| Shock resistance 100g/11 msec according IEC 60068-2-6 |
| Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
| CE-Conformity according to EC 2014/30/EU |
| ORDER CODE / PRESSURE TANSMITTER-EPT/DIN EN 175301-803/ 58 TO 14500 PSI |
|||
| Measuring range | Part No. | ||
| 58 to 232 psi | 435016 | ||
| 58 to 580 psi | 435040 | ||
| 58 to 1450 psi | 435100 | ||
| 58 to 3625 psi | 435250 | ||
| 58 to 5800 psi | 435400 | ||
| 58 to 8700 psi | 435600 | ||
| 58 to 14500 psi | 435999 | ||
| Other pressure ranges on request | |||
PRESSURE TRANSMITTER-EPT/M12
58 TO 14500 PSI
DETAILS
| PRESSURE TRANSMITTER-EPT/M12/ 58 to 14500 PSI |
| Operating voltage (0 to 10 V) 15 to 30 VDC |
| Operating voltage (4 to 20 mA) 10 to 30 VDC |
| Output short-circuit-proof |
| Supply voltage reverse polarity protection |
| Electrical connection M12 |
| Fluid connection G 1/4 |
| Wrench 22 mm |
| Protection class IP67 |
| Temperature range -40° C to +105° C |
| Temperature range medium -40° C to +125° C |
| Housing stainless steel AISi 304 |
| Wetted material stainless steel AISi 430 F/17-4 PH |
| Overload pressure see table |
| Hystersis ± 0,15% FS max |
| Linearity ± 0,25% FS max |
| Temperature sensitivity (zero point) ± 0,02% FS/°C max |
| Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
| Shock resistance 100g/11 msec according IEC 60068-2-6 |
| Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
| CE-Conformity according to EC 2014/30/EU |
| ORDER CODE / PRESSURE TANSMITTER-EPT/M12/ 58 TO 14500 PSI |
|||
| Measuring range | Part No. | ||
| 58 to 232 psi | 432016 | ||
| 58 to 580 psi | 432040 | ||
| 58 to 1450 psi | 432100 | ||
| 58 to 3625 psi | 432250 | ||
| 58 to 5800 psi | 432400 | ||
| 58 to 8700 psi | 432600 | ||
| 58 to 14500 psi | 432999 | ||
| Other pressure ranges on request | |||
PRESSURE SWITCH-MECHANICAL /
PNEUMATIC TO 232 PSI
DETAILS
| PRESSURE SWITCH-MECHANICAL /PNEUMATIC TO 232 PSI |
| Operating fluid Neutral gaseous and liquid fluids |
| Mounting method 2x drill-hole Ø 5,2 mm |
| Fluid connection G1/4“ female thread , NPT 1/4“ or flange |
| Environmental temperature -10° C to +80° C |
| Maximum pressure 290 psi |
| Operating pressure range 0,2 to 2/0,5 to 8/1 to 16 bar |
| Repeatability < 2% of max. pressure range FS |
| Differential reset see diagram |
| Max. switching frequency 200/min |
| Vibration resistance 10 g (10 to 2000 Hz) |
| Shock resistance 30 g |
| Electrical connection DIN 43650-A (EN 175301-803) |
| Switching element toggle switch with control unit |
| Operating cycles > 2 x 106 |
| Operating voltage/current AC 12: 4 A/250 VAC ; AC14: 1 A/250 VAC DC 12: 3 A/28 VDC ; DC14: 4 A/28 VDC |
| Degree of protection IP65 |
| Material Housing: Pressure die-cast, knob: Alu |
| Seals Perbunan |
| Weight~ 0,295 kg |
| ORDER CODE / PRESSURE SWITCH-MECHANICAL / PNEUMATIC TO 232 PSI |
|||
| Pressure adjustment range | Part No. | ||
| 7 to 116 psi | 451208 | ||
| 14,5 to 232 psi | 451216 | ||
| Other pressure ranges on request | |||
PRESSURE SWITCH-MECHANICAL /
HYDRAULIC TO 5800 PSI
DETAILS
| PRESSURE SWITCH-MECHANICAL / HYDRAULIC TO 5800 PSI |
| Operating fluid self-lubricating fluid |
| Fluid connection G1/4“ optional flange DIN ISO 16873 |
| Environmental temperature -30° C bis +80° C |
| Fluid temperature max. +80° C |
| Maximum pressure 5075 psi (flange horizontal 3625 psi) |
| Cracking pressure > 8700 psi |
| Operating pressure range 10-30; 10-80; 10-120; 20-200; 20-320 bar |
| Repeatability < 2% of max. pressure range FS |
| Differential reset |
| Vibration resistance 10 g (10 to 2000 Hz) |
| Shock resistance 30 g |
| Electrical connection DIN 43650-A (EN 175301-803) |
| Switching element toggle switch with control unit |
| Operating cycles > 2 x 106 |
| Operating voltage/current AC 12: 4 A/250 VAC ; AC14: 1 A/250 VAC DC 12: 3 A/28 VDC ; DC14: 4 A/28 VDC |
| Degree of protection IP65 |
| Material Housing: Pressure die-cast, knob: Alu |
| Seals dynamic: PTFE; static: NBR |
| Weight ~ 0,325 kg |
| ORDER CODE / PRESSURE SWITCH-MECHANICAL / HYDRAULIC TO 5800 PSI | |||
| Pressure adjustment range | Part No. | ||
| 145 to 1160 psi | 452708 | ||
| 145 to 1740 psi | 452712 | ||
| 290 to 2900 psi | 452720 | ||
| 290 to 4640 psi | 452732 | ||
| Other pressure ranges on request | |||
PRESSURE SWITCH PDC – ADJUSTABLE HYSTERISIS /
PNEUMATIC TO 232 PSI
DETAILS
| PRESSURE SWITCH PDC – ADJUSTABLE HYSTERISIS / PNEUMATIC TO 232 PSI |
| Operating fluid Neutral gaseous and liquid fluids |
| Fluid connection G1/4“ |
| Environmental temperature -20° C bis +80° C |
| Fluid temperature max. +80° C |
| Maximum pressure 870 psi |
| Operating pressure range 0,2 to 2/0,5 to 8/1 to 16 bar |
| Repeatability < 2% of max. pressure range FS |
| Differential reset |
| Vibration resistance 10 g (10 to 2000 Hz) |
| Shock resistance 30 g |
| Electrical connection DIN 43650-A (EN 175301-803) |
| Switching element toggle switch |
| Operating voltage/current AC 12: 4 A/250 VAC; AC14: 1 A/250 VAC DC 12: 2 A/28 VDC; DC14: 0,5 A/28 VDC |
| Degree of protection IP65 |
| Material Housing: galvanized steel |
| Seals dynamic: PTFE; static: NBR |
| Weight~ 0,1 kg |
| ORDER CODE / PRESSURE SWITCH PDC – ADJUSTABLE HYSTERISIS / PNEUMATIC TO 232 PSI | |||
| Measuring range | Part No. | ||
| 3 to 29 psi | 453302 | ||
| 7 to 116 psi | 453308 | ||
| 14,5 to 232 psi | 453316 | ||
| Other pressure ranges on request | |||
PRESSURE SWITCH HDC – ADJUSTABLE HYSTERISIS /
HYDRAULIC TO 4640 PSI
DETAILS
| PRESSURE SWITCH HDC –ADJUSTABLE HYSTERISIS / HYDRAULIC TO 4640 PSI |
| Operating fluid self-lubricating fluid |
| Fluid connection G1/4“ |
| Environmental temperature -20° C bis +80° C |
| Fluid temperature max. +80° C |
| Maximum pressure 5075 psi |
| Operating pressure range 10 to 80; 10 to 120; 20 to 250; 20 to 320 bar |
| Repeatability < 2% of max. pressure range FS |
| Differential reset |
| Vibration resistance 10 g (10 to 2000 Hz) |
| Shock resistance 30 g |
| Electrical connection DIN 43650-A (EN 175301-803) |
| Switching element toggle switch |
| Operating voltage/current AC 12: 4 A/250 VAC; AC14: 1 A/250 VAC DC 12: 2 A/28 VDC; DC14: 0,5 A/28 VDC |
| Degree of protection IP65 |
| Material Housing: galvanized steel |
| Seals dynamic: PTFE; static: NBR |
| Weight ~ 0,1 kg |
| ORDER CODE / DRUCKSCHALTER HDC – PRESSURE SWITCH HDC –ADJUSTABLE HYSTERISIS / HYDRAULIC TO 4640 PSI | |||
| Pressure adjustment range | Part No. | ||
| 145 to 1160 psi | 454308 | ||
| 145 to 1740 psi | 454312 | ||
| 290 to 2900 psi | 454320 | ||
| 290 to 4640 psi | 454332 | ||
| Other pressure ranges on request | |||