PRESSURE SWITCH /
PRESSURE TRANSMITTER
PRESSURE SWITCH-TRANSMITTER/ALLFLUID
-14,5 TO 5800 PSI
DETAILS
PRESSURE SWITCH-TRANSMITTER/ -14,5 TO 5800 PSI |
Operating voltage 17 to 33 VDC |
Current consumption w/o switch. output max50 mA |
Switching current OUT1/OUT2 250 mA/each |
Analog output/ burden 4…20 mA/ <500 Ohm |
Switchlogic programmable NO/NC |
Switch output short circuit protection |
Electrical connection M 12 |
Fluid connection G 1/4i external thread (optional adapter) |
3-digit LED-display 7-segment red |
Display programmable 0° / 180° |
Light for switch status all-around LED |
Protection class IP65/67 IEC 60529 |
Temperature range -20° C to +80° C |
Temperature range medium -20° C to +80° C |
Wetted material stainless steel/FPM/ceramic |
Overload pressure 3 x FS (max 1500bar) |
Linearity 1,0% FS |
Temperature sensitivity (zero point) ± 0,65% FS/10K |
Dimensions (H x W x D) 80 x 41 x 42 mm |
ORDER CODE / PRESSURE SWITCH-TRANSMITTER/ -14,5 TO 5800 PSI |
|||
Measuring range | Part No. | ||
– 14,5 to 0 psi | 413000 | ||
0 to 232 psi | 413016 | ||
0 to 1450 psi | 413100 | ||
0 to 3625 psi | 413250 | ||
0 to 5800 psi | 413400 | ||
Other pressure ranges on request |
DETAILS
PRESSURE TRANSMITTER-EPT/DEUTSCH DT/ 58 to 14500 PSI |
Operating voltage (0 to 10 V) 15 to 30 VDC |
Operating voltage (4 to 20 mA) 10 to 30 VDC |
Output short-circuit-proof |
Supply voltage reverse polarity protection |
Electrical connection Deutsch DT 4 pole |
Fluid connection G 1/4 |
Wrench 22 mm |
Protection class IP67 |
Temperature range -40° C to +105° C |
Temperature range medium -40° C to +125° C |
Housing stainless steel AISi 304 |
Wetted material stainless steel AISi 430 F/17-4 PH |
Overload pressure see table |
Hystersis ± 0,15% FS max |
Linearity ± 0,25% FS max |
Temperature sensitivity (zero point) ± 0,02% FS/°C max |
Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
Shock resistance 100g/11 msec according IEC 60068-2-6 |
Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
CE-Conformity according to EC 2014/30/EU |
ORDER CODE / PRESSURE TANSMITTER-EPT/DEUTSCH DT/ 58 TO 14500 PSI |
|||
Measuring range | Part No. | ||
58 to 232 psi | 434016 | ||
58 to 580 psi | 434040 | ||
58 to 1450 psi | 434100 | ||
58 to 3625 psi | 434250 | ||
58 to 5800 psi | 434400 | ||
58 to 8700 psi | 434600 | ||
58 to 14500 psi | 434999 | ||
Other pressure ranges on request |
DETAILS
PRESSURE TRANSMITTER-EPT/AMP SUPER SEAL/ 58 to 14500 PSI |
Operating voltage (0 to 10 V) 15 to 30 VDC |
Operating voltage (4 to 20 mA) 10 to 30 VDC |
Output short-circuit-proof |
Supply voltage reverse polarity protection |
Electrical connection AMP SUPER SEAL |
Fluid connection G 1/4 |
Wrench 22 mm |
Protection class IP67 |
Temperature range -40° C to +105° C |
Temperature range medium -40° C to +125° C |
Housing stainless steel AISi 304 |
Wetted material stainless steel AISi 430 F/17-4 PH |
Overload pressure see table |
Hystersis ± 0,15% FS max |
Linearity ± 0,25% FS max |
Temperature sensitivity (zero point) ± 0,02% FS/°C max |
Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
Shock resistance 100g/11 msec according IEC 60068-2-6 |
Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
CE-Conformity according to EC 2014/30/EU |
ORDER CODE / PRESSURE TANSMITTER-EPT/AMP SUPER SEAL/ 58 TO 14500 PSI |
|||
Measuring range | Part No. | ||
58 to 232 psi | 436016 | ||
58 to 580 psi | 436040 | ||
58 to 1450 psi | 436100 | ||
58 to 3625 psi | 436250 | ||
58 to 5800 psi | 436400 | ||
58 to 8700 psi | 436600 | ||
58 to 14500 psi | 436999 | ||
Other pressure ranges on request |
DETAILS
PRESSURE TRANSMITTER-EPT/DIN EN 175301/ 58 to 14500 PSI |
Operating voltage (0 to 10 V) 15 to 30 VDC |
Operating voltage (4 to 20 mA) 10 to 30 VDC |
Output short-circuit-proof |
Supply voltage reverse polarity protection |
Electrical connection DIN EN 175301-803 |
Fluid connection G 1/4 |
Wrench 22 mm |
Protection class IP67 |
Temperature range -40° C to +105° C |
Temperature range medium -40° C to +125° C |
Housing stainless steel AISi 304 |
Wetted material stainless steel AISi 430 F/17-4 PH |
Overload pressure see table |
Hystersis ± 0,15% FS max |
Linearity ± 0,25% FS max |
Temperature sensitivity (zero point) ± 0,02% FS/°C max |
Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
Shock resistance 100g/11 msec according IEC 60068-2-6 |
Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
CE-Conformity according to EC 2014/30/EU |
ORDER CODE / PRESSURE TANSMITTER-EPT/DIN EN 175301-803/ 58 TO 14500 PSI |
|||
Measuring range | Part No. | ||
58 to 232 psi | 435016 | ||
58 to 580 psi | 435040 | ||
58 to 1450 psi | 435100 | ||
58 to 3625 psi | 435250 | ||
58 to 5800 psi | 435400 | ||
58 to 8700 psi | 435600 | ||
58 to 14500 psi | 435999 | ||
Other pressure ranges on request |
DETAILS
PRESSURE TRANSMITTER-EPT/M12/ 58 to 14500 PSI |
Operating voltage (0 to 10 V) 15 to 30 VDC |
Operating voltage (4 to 20 mA) 10 to 30 VDC |
Output short-circuit-proof |
Supply voltage reverse polarity protection |
Electrical connection M12 |
Fluid connection G 1/4 |
Wrench 22 mm |
Protection class IP67 |
Temperature range -40° C to +105° C |
Temperature range medium -40° C to +125° C |
Housing stainless steel AISi 304 |
Wetted material stainless steel AISi 430 F/17-4 PH |
Overload pressure see table |
Hystersis ± 0,15% FS max |
Linearity ± 0,25% FS max |
Temperature sensitivity (zero point) ± 0,02% FS/°C max |
Minimum load for analog output 1000 Ohm (24 V = 600 Ohm) see chart |
Shock resistance 100g/11 msec according IEC 60068-2-6 |
Vibration resistance 20 g max at 10…2000 Hz according to IEC 60068-2-6 |
CE-Conformity according to EC 2014/30/EU |
ORDER CODE / PRESSURE TANSMITTER-EPT/M12/ 58 TO 14500 PSI |
|||
Measuring range | Part No. | ||
58 to 232 psi | 432016 | ||
58 to 580 psi | 432040 | ||
58 to 1450 psi | 432100 | ||
58 to 3625 psi | 432250 | ||
58 to 5800 psi | 432400 | ||
58 to 8700 psi | 432600 | ||
58 to 14500 psi | 432999 | ||
Other pressure ranges on request |
PRESSURE SWITCH-MECHANICAL /
PNEUMATIC TO 232 PSI
DETAILS
PRESSURE SWITCH-MECHANICAL /PNEUMATIC TO 232 PSI |
Operating fluid Neutral gaseous and liquid fluids |
Mounting method 2x drill-hole Ø 5,2 mm |
Fluid connection G1/4“ female thread , NPT 1/4“ or flange |
Environmental temperature -10° C to +80° C |
Maximum pressure 290 psi |
Operating pressure range 0,2 to 2/0,5 to 8/1 to 16 bar |
Repeatability < 2% of max. pressure range FS |
Differential reset see diagram |
Max. switching frequency 200/min |
Vibration resistance 10 g (10 to 2000 Hz) |
Shock resistance 30 g |
Electrical connection DIN 43650-A (EN 175301-803) |
Switching element toggle switch with control unit |
Operating cycles > 2 x 106 |
Operating voltage/current AC 12: 4 A/250 VAC ; AC14: 1 A/250 VAC DC 12: 3 A/28 VDC ; DC14: 4 A/28 VDC |
Degree of protection IP65 |
Material Housing: Pressure die-cast, knob: Alu |
Seals Perbunan |
Weight~ 0,295 kg |
ORDER CODE / PRESSURE SWITCH-MECHANICAL / PNEUMATIC TO 232 PSI |
|||
Pressure adjustment range | Part No. | ||
7 to 116 psi | 451208 | ||
14,5 to 232 psi | 451216 | ||
Other pressure ranges on request |
PRESSURE SWITCH-MECHANICAL /
HYDRAULIC TO 5800 PSI
DETAILS
PRESSURE SWITCH-MECHANICAL / HYDRAULIC TO 5800 PSI |
Operating fluid self-lubricating fluid |
Fluid connection G1/4“ optional flange DIN ISO 16873 |
Environmental temperature -30° C bis +80° C |
Fluid temperature max. +80° C |
Maximum pressure 5075 psi (flange horizontal 3625 psi) |
Cracking pressure > 8700 psi |
Operating pressure range 10-30; 10-80; 10-120; 20-200; 20-320 bar |
Repeatability < 2% of max. pressure range FS |
Differential reset |
Vibration resistance 10 g (10 to 2000 Hz) |
Shock resistance 30 g |
Electrical connection DIN 43650-A (EN 175301-803) |
Switching element toggle switch with control unit |
Operating cycles > 2 x 106 |
Operating voltage/current AC 12: 4 A/250 VAC ; AC14: 1 A/250 VAC DC 12: 3 A/28 VDC ; DC14: 4 A/28 VDC |
Degree of protection IP65 |
Material Housing: Pressure die-cast, knob: Alu |
Seals dynamic: PTFE; static: NBR |
Weight ~ 0,325 kg |
ORDER CODE / PRESSURE SWITCH-MECHANICAL / HYDRAULIC TO 5800 PSI | |||
Pressure adjustment range | Part No. | ||
145 to 1160 psi | 452708 | ||
145 to 1740 psi | 452712 | ||
290 to 2900 psi | 452720 | ||
290 to 4640 psi | 452732 | ||
Other pressure ranges on request |
PRESSURE SWITCH PDC – ADJUSTABLE HYSTERISIS /
PNEUMATIC TO 232 PSI
DETAILS
PRESSURE SWITCH PDC – ADJUSTABLE HYSTERISIS / PNEUMATIC TO 232 PSI |
Operating fluid Neutral gaseous and liquid fluids |
Fluid connection G1/4“ |
Environmental temperature -20° C bis +80° C |
Fluid temperature max. +80° C |
Maximum pressure 870 psi |
Operating pressure range 0,2 to 2/0,5 to 8/1 to 16 bar |
Repeatability < 2% of max. pressure range FS |
Differential reset |
Vibration resistance 10 g (10 to 2000 Hz) |
Shock resistance 30 g |
Electrical connection DIN 43650-A (EN 175301-803) |
Switching element toggle switch |
Operating voltage/current AC 12: 4 A/250 VAC; AC14: 1 A/250 VAC DC 12: 2 A/28 VDC; DC14: 0,5 A/28 VDC |
Degree of protection IP65 |
Material Housing: galvanized steel |
Seals dynamic: PTFE; static: NBR |
Weight~ 0,1 kg |
ORDER CODE / PRESSURE SWITCH PDC – ADJUSTABLE HYSTERISIS / PNEUMATIC TO 232 PSI | |||
Measuring range | Part No. | ||
3 to 29 psi | 453302 | ||
7 to 116 psi | 453308 | ||
14,5 to 232 psi | 453316 | ||
Other pressure ranges on request |
PRESSURE SWITCH HDC – ADJUSTABLE HYSTERISIS /
HYDRAULIC TO 4640 PSI
DETAILS
PRESSURE SWITCH HDC –ADJUSTABLE HYSTERISIS / HYDRAULIC TO 4640 PSI |
Operating fluid self-lubricating fluid |
Fluid connection G1/4“ |
Environmental temperature -20° C bis +80° C |
Fluid temperature max. +80° C |
Maximum pressure 5075 psi |
Operating pressure range 10 to 80; 10 to 120; 20 to 250; 20 to 320 bar |
Repeatability < 2% of max. pressure range FS |
Differential reset |
Vibration resistance 10 g (10 to 2000 Hz) |
Shock resistance 30 g |
Electrical connection DIN 43650-A (EN 175301-803) |
Switching element toggle switch |
Operating voltage/current AC 12: 4 A/250 VAC; AC14: 1 A/250 VAC DC 12: 2 A/28 VDC; DC14: 0,5 A/28 VDC |
Degree of protection IP65 |
Material Housing: galvanized steel |
Seals dynamic: PTFE; static: NBR |
Weight ~ 0,1 kg |
ORDER CODE / DRUCKSCHALTER HDC – PRESSURE SWITCH HDC –ADJUSTABLE HYSTERISIS / HYDRAULIC TO 4640 PSI | |||
Pressure adjustment range | Part No. | ||
145 to 1160 psi | 454308 | ||
145 to 1740 psi | 454312 | ||
290 to 2900 psi | 454320 | ||
290 to 4640 psi | 454332 | ||
Other pressure ranges on request |